Description

Spacare pH Up 500g

pH Up is used to raise the pH value of a spa or hot tub to the required level of 7.2 to 7.6 without affecting Alkalinity Levels.

These levels between 7.2 to 7.6, are the ideal ones to promote bather comfort, optimum chemical efficiency, and protection of spa or hot tub equipment.

Specifications

Directions:
Test the pH of your spa or hot tub water
If the reading is below 7.2, use pH Up to raise it according to the dosage chart below:
Below 6.8  10g for every 1000L
6.8 – 7.0  8g for every 1000L
7.0 – 7.2  6g for every 1000L

Applications Instructions:
Pre-dissolve the product in a clean plastic container of clean warm water.
Stir well to ensure the product is fully dissolved.
Carefully add the solution to the spa or hot tub whilst the pump is turned on, preferably near the water inlets to aid distribution.
After a minimum of 6 hours, recheck the pH level and, if necessary, repeat the treatment until the ideal pH is obtained.
Please note several treatments may be required.